sulphuric acid submerged pump is a new generation of pump products successfully developed on the basis of the introduction of advanced technology and combined with the characteristics of domestic water pumps. In order to give newbies a better understanding of the device, let's take a closer look at its related information.

1. Conditions of use of sulphuric acid submerged pump:

1. The ambient temperature of the pump is less than or equal to 40℃, the humidity is less than or equal to 95%, and the altitude is less than or equal to 1000 meters.

2. The temperature of the medium does not exceed 60℃, and the weight of the medium is 1～1.3kg/dm3.

3. The use range of cast iron material is PH5~9.

4. Stainless steel material can use general corrosive medium.

5. The altitude of the operating environment should not exceed 1000 meters. When the above conditions are exceeded, it should be put forward when ordering, so as to provide you with more reliable products.

Note: If the user has special requirements for temperature, medium, etc., please indicate the details of the conveying medium when ordering, so that the unit can provide more reliable products.

2. Product features of sulphuric acid submerged pump:

1. The unique single-piece or double-blade impeller structure greatly improves the ability of dirt to pass through, and can effectively pass through 5 times the fibrous material of the pump diameter and solid particles with a diameter of about 50% of the pump diameter.

2. The mechanical seal adopts a new type of hard and corrosion-resistant titanium tungsten material, which can make the pump run safely and continuously for more than 8,000 hours.

3. The overall structure is compact, the volume is small, the noise is low, the energy saving effect is remarkable, and the maintenance is convenient. There is no need to build a pump room, and it can work by diving into the water, which greatly reduces the project cost.

4. The pump has compact structure, small volume, convenient movement and simple installation.

5. It can be equipped with an automatic liquid level control cabinet, which can automatically control the start and stop of the pump according to the required liquid level change, without the need for special personnel to take care of it, and it is very convenient to use.

6. The pump is a vertical structure. When working, the pump body is immersed in the liquid, so it is easy to start. There is no problem of exhaust and evacuation. At the same time, it has the characteristics of no leakage.

7. The shaft connection structure is advanced and reliable. The pump and the motor are connected by a shaft coupling. The size of the pump shaft is precise, which ensures the smooth operation of the pump and leaves a sufficient safety factor.

8. The pump has two types: single-pipe installation and double-pipe installation, and the supports have disc and square disc installation, which are suitable for different needs.

sulphuric acid submerged pump https://www.luolintec.com/Submerged-pump